Heavy Barred Gate 3.65m

Specification

Product description

New Zealand Fencing Solutions Medium Barred Gate.These a good heavy duty gates. Check out the full specs below.

Gate - frame

32mm OD pipe thickness 2mm

Gate - internal uprights

4 x 32/6mm flat steel which are twisted at 90 degrees at the top and bottom and fully welded onto the gate frame

Gate - internal horizontals

5 x 25mm OD pipe thickness 2mm. These go through holes drilled in the flat uprights and are then welded for extra strength

Gate - hinge lugs

2 x heavy duty hinge lugs fully welded to the frame

Gate - gate latch hook

this is welded on the inside of the frame. Simply insert the gate chain and close the hook, no wire is required

Gate - height

1m total including the frame

Gate - length

3.65m frame length with the hinge lugs extending out another 45mm. This is an overall length of 3.69m

Gate - galvanized spec

Hot dipped galvanized after welding to a minimum of 500 grams m/2

Gate - weight

44.3kg