Ultra Heavy Barred Gate 3.69m

Specification

Gate - frame

42mm OD, pipe thickness 2.5mm

Gate - internal uprights

2 x 40mm/6mm flat steel.

Gate - internal horizontals

5 times 32mm OD, pipe thickness 2.5mm. These are full length; they go through holes drilled in the flat uprights.

Gate - hinge lugs

2 heavy 50mm by 5mm hinge lugs are fully welded to the frame 700mm apart

Gate - gate latch hook

this is welded on the inside of the frame. Simply insert the gate chain and close the hook, no wire is required. It is 300mm below the top of the gate

Gate - height

1.05m total including frame

Gate - length

3.65m frame length with hinge lugs extending out another 45mm. This is an overall length of 3.69m.

Gate - galvanized spec

The entire gate is hot dipped galvanized after welding to a minimum of 500grams m/2